User's Manual

Enter the device user name. By default, the user name is admin.
Password
Enter the device password.
Cauon
The password strength of the device can be automacally checked. We highly recommend
y
ou change the password of your own choosing (using a minimum of 8 characters, including
at least three kinds of following categories: upper case leers, lower case leers, numbers,
and special characters) in order to increase the security of your product. And we recommend
you reset your password regularly, especially in the high security system, reseng the
password monthly or weekly can beer protect your product.
Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
6. Oponal: Check S
ynchronize Time to synchronize the device me with the PC running the client
aer adding the device to the client.
7. Oponal: Check Import to Group to create a group by the device name.
Note
You can import all the channels of the device to the corresponding group by default.
8. Finish adding the de
vice.
-
Click Add to add the device and back to the device list page.
-
Click Add and New to save the sengs and connue to add other device.
9. Perform the following operaons aer adding the devices.
Remote
Conguraon
Click
on Operaon column to set remote conguraon of the
c
orresponding device.
Note
• For some models of devices, you can open its web window. To open
the original r
emote conguraon window, press Ctrl and click
.
•
For detail operaon steps for the remote conguraon, see the user
manual of the de
vice.
Device Status Click on Operaon column to view device status.
Add Devices by IP Segment
If you want to add devices of which the IP addresses are within an IP segment, you can specify the
s
tart IP address and end IP address, user name, password, and other parameters to add them.
Steps
1. Enter the Device Management module.
DS-K3Y501 Flap Barrier User Manual
34