User's Manual

Import to Group
You can enter 1 to create a group by the device name. All the channels of the device will be
imported to the corresponding group by default. 0 indicates disabling this funcon.
6. Click and select the template le.
7. Click Add t
o import the devices.
6.2.2 Reset Device Password
If you forgot the password of the detected online devices, you can reset the device password
through the client.
Steps
1. Enter Device Management page.
2. Click Online Device to show the online device area.
All the online devices in the same subnet will display in the list.
3. Select the device from the list and click
on the Operaon column.
4. Click Export to save the device le on your PC and then send the le to our technical support.
Note
For the following operaons for
reseng the password, contact our technical support.
Cauon
The password strength of the device can be automacally checked. We highly recommend you
chang
e the password of your own choosing (using a minimum of 8 characters, including at least
three kinds of following categories: upper case leers, lower case leers, numbers, and special
characters) in order to increase the security of your product. And we recommend you reset your
password regularly, especially in the high security system, reseng the password monthly or
weekly can beer protect your product.
Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
6.3 Group Management
The resources added should be organized into groups for convenient management, such as access
poin
ts. You can do some further operaons of the device through the groups.
6.3.1 Add Group
You can add group to organize the added device for convenient management.
DS-K3Y501 Flap Barrier User Manual
37