User's Manual

-
En
ter the card number manually.
-
Place the card on the card enrollment staon or card reader and click R
ead to get the card
number. The card number will display in the Card No. eld automacally.
Note
You need to click Sengs to set the card issuing mode and related parameters rst. For
de
tails, refer to Set Card Issuing Parameters .
5. Select the c
ard type according to actual needs.
Normal Card
The card is used for opening doors for normal usage.
Duress Card
When the person is under duress, he/she can swipe the duress card to open the door. The
door will be unlocked and the client will receive a duress event to nofy the security
personnel.
Patrol Card
This card is used for the inspecon sta to check the their aendance of inspecon. By
swiping the card on the specied card reader, the person is marked as on duty of inspecon
at that me.
Dismiss Card
B
y swiping the card on the card reader, it can stop the buzzing of the card reader.
6. Click Add.
The card will be issued to the person.
7. Conrm to add the person.
-
Click Add t
o add the person and close the Add Person window.
-
Click Add and New to add the person and connue to add other persons.
6.4.4 Upload a Face Photo from Local PC
When adding person, you can upload a face photo stored in local PC to the client as the person's
prole.
Steps
1. En
ter Person module.
2. Select an organizaon in the organizaon list to add the person and click Add.
Note
Enter the person's basic informaon rst. For details about conguring person's basic
informaon, refer to Congure Basic Informaon .
3. Click Add Face in the Basic Informaon panel.
4. Select Upload.
DS-K3Y501 Flap Barrier User Manual
41