User's Manual

-
Click Add t
o add the person and close the Add Person window.
-
Click Add and New to add the person and connue to add other persons .
Note
Once the
ngerprint is added, the ngerprint type cannot be changed.
6.4.9 Congure Access Control Informaon
When adding a person, you can set her/his access control properes, such as seng the person as
visit
or or as blacklist person, or as super user who has super authorizaon.
Steps
1. Enter Person module.
2. Select an organizaon in the organizaon list to add the person and click Add.
Note
Enter the person's basic informaon rst. For details about conguring person's basic
informaon, refer to Congure Basic Informaon .
3. In the Access Con
trol panel, set the person's access control properes.
PIN Code
The PIN code must be used aer card or ngerprint when accessing. It cannot be used
independently. It should contain 4 to 8 digits.
Super User
If the person is set as a super user, he/she will have authorizaon to access all the doors/
oor
s and will be exempted from remaining closed restricons, all an-passback rules, and
rst person authorizaon.
Note
Once a person has been congured as a super user, all his/her ngerprints or cards turn to
super
ngerprints or super cards.
Extended Door Open Time
When the per
son accessing door, grant this person more me to pass through doors which
have been congured with extended open duraon. Use this funcon for the persons with
r
educed mobility.
For details about seng the door's open duraon, refer to Congure Parameters for Door .
Add to Blacklist
Add the person to the blacklist and when the person tries to access doors/oors, an event
will be triggered and send to the client to nofy the security personnel.
Mark as Visitor
DS-K3Y501 Flap Barrier User Manual
45