User's Manual

2. Select an added organizaon in the list, or click Add in the upper-le corner to add an
organizaon and then select it.
3. Click Import t
o open the Import panel and check Face.
4. Oponal: Enable Verify by Device to check whether face recognion device managed in the
client can recognize the face in the photo.
5. Click
to select a face picture le.
Note
• The (folder of) face pictures should be in ZIP format.
•
Each picture le should be in JPG format and should be no larger than 200 KB.
• Each picture le should be named as "Person ID_Name". The Person ID should be the same
with that of the imported person informaon.
6. Click Import t
o start imporng.
The imporng progress and result will be displayed.
6.4.16 Export Person Informaon
You can export the added persons' informaon to local PC as a CSV le.
Before You Start
Mak
e sure you have added persons to an organizaon.
Steps
1. Enter the Person module.
2. Oponal: Select an
organizaon in the list.
Note
All persons' informaon will be exported if you do not select any organizaon.
3. Click Export t
o open the Export panel and check Person Informaon as the content to export.
4. Check desired items to export.
5. Click Export to save the exported CSV le in your PC.
6.4.17 Export Person Pictures
You can export face picture le of the added persons and save in your PC.
Be
fore You Start
Make sure you have added persons and their face pictures to an organizaon.
Steps
1. En
ter the Person module.
2. Oponal: Select an organizaon in the list.
DS-K3Y501 Flap Barrier User Manual
49