User's Manual

6. Oponal: Click Cop
y to, and then select the card reader(s) to copy the parameters in the page
to the selected card reader(s).
Congure Parameters for Alarm Output
Aer adding the access control device, if the device links to alarm outputs, you can congure the
parameters.
Steps
1. Click Access Control → Advanced Funcon → De
vice Parameter to enter access control
parameter conguraon page.
2. In the device list on the le, click to expand the door, select an alarm input and you can edit
the alarm input's parameters on the right.
3. Set the alarm output parameters.
Name
Edit the card reader name as desired.
Alarm Output Acve Time
How long the alarm output will last aer triggered.
4. Click OK.
5. Oponal: Se
t the switch on the upper right corner to ON to trigger the alarm output.
Congure Parameters for Lane Controller
Aer adding the lane controller to the client, you can congure its parameters for passing through
the lane.
Steps
1. Click Access Control → Advanced
Funcon → Device Parameter to enter Parameter Sengs
page.
2. In the device list on the le, select a lane controller and you can edit the lane controller's
parameters on the right.
3. Edit the parameters.
Passing Mode
Select the controller which will control the barrier status of the device.
• If you select According to Lane Controller's DIP Sengs, the device will follow the lane
c
ontroller's DIP sengs to control the barrier. The sengs on the soware will be invalid.
• If you select According to Main Controller's Sengs, the device will follow the sengs of
the soware to control the barrier. The DIP sengs of the lane controller will be invalid.
Free Passing Authencaon
DS-K3Y501 Flap Barrier User Manual
60