User's Manual

Note
The lane width will aect the device working. Set a correct lane width or the barrier may not
open.
Do Not Open Barrier in Authencates in Lane
If ther
e is someone or something in the lane, the gate will not open even if the credenal is
authencated.
This funcon is designed to avoid more than one person passing through the gate with only
one authencaon.
4. Click OK.
6.7.2 Congure Remaining Open/Closed
You can set the status of the door as open or closed. For example, you can set the door remaining
closed in the holiday, and set the door remaining open in the specied period of the work day.
Before You Start
Add the access control devices to the system.
Steps
1. Click Access Control → Advanced
Funcon → Remain Open/Closed to enter the Remain Open/
Closed page.
2. Select the door that need to be congured on the le panel.
3. To set the door status during the work day, click the Week Schedule and perform the following
operaons.
1) Click R
emain Open or Remain Closed.
2) Drag the cursor to draw the me duraon, which means in that duraon of me, the
congured access group is acvated.
Note
Up to 8 me
duraons can be set to each day in the week schedule.
3) Oponal: P
erform the following operaons to edit the me duraons.
• Move the cursor to the me duraon and drag the me duraon on the meline bar to
the desired posion when the cursor turns to
.
•
Click the me duraon and directly edit the start/end me in the appeared dialog.
• Move the cursor to the start or the end of me
duraon and drag to lengthen or shorten
the me duraon when the cursor turns to .
4) Click Save.
Related Operaons
Copy to Whole
W
eek
Select one duraon on the me bar, click Copy to Whole Week to copy
all the duraon sengs on this me bar to other week days.
DS-K3Y501 Flap Barrier User Manual
62