User's Manual

5) In the Custom Wiegand tab, set the rule's start bit, length, and the decimal digit.
7. Click Save.
6.7.5 Congure Card Reader Authencaon Mode and Schedule
You can set the passing rules for the card reader of the access control device according to your
actual needs.
St
eps
1. Click Access Control → Advanced Funcon → Authencaon to enter the authencaon mode
conguraon page.
2. Select a c
ard reader on the le to congure.
3. Set card reader authencaon mode.
1) Click Conguraon.
Figure 6-4 Select Card Reader Authencaon Mode
DS-K3Y501 Flap Barrier User Manual
67