User's Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Safety Instruction
- Available Model
- Chapter 1 Overview
- Chapter 2 Appearance
- Chapter 3 Installation
- Chapter 4 Wiring
- Chapter 5 Activation
- Chapter 6 Quick Operation
- Chapter 7 Basic Operation
- Chapter 8 Operation via Web Browser
- 8.1 Login
- 8.2 Person Management
- 8.3 Configuration
- 8.3.1 View Device Information
- 8.3.2 Set Time
- 8.3.3 Set DST
- 8.3.4 View Open Source Software License
- 8.3.5 Upgrade and Maintenance
- 8.3.6 Security Mode Settings
- 8.3.7 Change Administrator's Password
- 8.3.8 View Device Arming/Disarming Information
- 8.3.9 Network Settings
- 8.3.10 Set Audio Parameters
- 8.3.11 Set Image Parameters
- 8.3.12 Set Authentication Parameters
- 8.3.13 Temperature Measurement Settings
- 8.3.14 Set Biometric Parameters
- 8.3.15 Visitor Settings
- 8.3.16 Set Screen Saver Picture
- Appendix A. Tips When Collecting/Comparing Face Picture
- Appendix B. Tips for Installation Environment
- Appendix C. Dimension
- Appendix D. Communication Matrix and Device Command
Figure 7-6 Failed Authencaon
3) Add face picture according to the instrucon on the visitor screen.
Note
●
The system will perform recognion according to the conguraons in Sengs → Basic
Sengs . Refer to Set Basic Parameters for details.
●
The page and instrucons are based on dual-screen devices and are referable for single-
screen devices.
●
Go to Visitor Check In Sengs and set the visitor informaon to be displayed.
4) Fill in the visitor informaon.
Note
Go to Visitor Check In Sengs and set the visitor informaon to be lled in.
2.
Tap Check In to check in the visitor.
3.
Oponal: Tap Live View to display part of the visitor informaon on the visitor screen.
Note
Refer to Prinng Receipt Sengs for conguraon details.
What to do next
Print visitor receipt and visitors can scan the QR code on the receipt to check out.
DS-K5032-3XFD Visitor Terminal User Manual
18










