User's Manual

2.
Tap Export Captured Picture or Export Visitor Records to export the picture captured or visitor
informaon recorded on the device to your USB ash drive.
System Maintenance
You can view the device informaon, restore the system to factory sengs or default sengs,
reboot the device, exit the system and start wizard.
Tap in the top right corner of the home page. Tap Sengs → System Maintenance .
Figure 7-17 System Maintenance
Soware Upgrading
Plug the USB ash drive in the device USB interface.
●
Tap Upgrade → OK , and choose the
le with the extension of zip in the USB ash drive for
the device to read and start system upgrading.
●
Tap Upgrade Component → OK , and choose the
le with the extension of dav in the USB
ash drive for the device to read and start component upgrading.
●
Tap Upgrade Temperature Detecon Module → OK , and choose the le with the extension
of dav in the USB
ash drive for the device to read and start temperature detecon module
upgrading.
Restore to Factory Sengs
All parameters will be restored to the factory sengs. The system will reboot to take eect.
Restore to Default Sengs
DS-K5032-3XFD Visitor Terminal User Manual
32