User's Manual

You can set the interval between 2 connuous recognion of a same person during the
authencaon. In the congured interval, Person A can only recognized once. If another person
(Person B) has recognized during the interval, Person A can recognized again.
8.3.13 Temperature Measurement Sengs
You can set the temperature measurement parameters, including unit, Max. temperature, Min.
temperature and temperature measurement distance.
Steps
Note
Only devices with temperature measurement funcon supports the sengs.
1.
Click Conguraon → Temperature → Temperature Sengs .
Figure 8-10 Temperature Measurement Sengs
2.
Enable Temperature Measurement.
3.
Congure the temperature measurement parameters.
Unit
Select a temperature unit according to your preference.
Over-Temperature Alarm Threshold (Max./Min.)
Congure the limit for temperature measurement result. Device will alarm when the visitor's
temperature exceeds or does not reach the threshold. The max. value is 37.3 ℃ and the min.
value is 35 ℃ by default.
Temperature Measurement Distance
DS-K5032-3XFD Visitor Terminal User Manual
56