POE & Wi-Fi Doorbell Camera User Manual
POE & Wi-Fi Doorbell Camera User Manual Legal Information User Manual About this Manual The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the company website. Please use this user manual under the guidance of professionals.
POE & Wi-Fi Doorbell Camera User Manual SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. OUR COMPANY SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
POE & Wi-Fi Doorbell Camera User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
POE & Wi-Fi Doorbell Camera User Manual EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/ 65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union.
POE & Wi-Fi Doorbell Camera User Manual 1. l'appareil ne doit pas produire de brouillage, et 2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada.
POE & Wi-Fi Doorbell Camera User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Danger Caution Note Description Indicates a hazardous situation which, if not avoided, will or could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.
POE & Wi-Fi Doorbell Camera User Manual Safety Instruction Warning • The working temperature of the device is from -30 °C to 50 °C. • All the electronic operation should be strictly compliance with the electrical safety regulations, fire prevention regulations and other related regulations in your local region. • Please use the power adapter, which is provided by normal company. The power consumption cannot be less than the required value.
POE & Wi-Fi Doorbell Camera User Manual • Please use the provided glove when open up the device cover, avoid direct contact with the device cover, because the acidic sweat of the fingers may erode the surface coating of the device cover. • Please use a soft and dry cloth when clean inside and outside surfaces of the device cover, do not use alkaline detergents. • Please keep all wrappers after unpack them for future use.
POE & Wi-Fi Doorbell Camera User Manual Model Current Manufacturer Standard MSA-C2000IC12.0-24P-GB 2 A MOSO POWER SUPPLY TECHNOLOGY CO.,LTD BS ADS-24S-121224GPB SHENZHEN HONOR ELECTRONIC CO.,LTD BS MSA-C1500IC12.0-18P-AU 1.5 A MOSO POWER SUPPLY TECHNOLOGY CO.,LTD AS ADS-25FSG-1212018GPSA 1.5 A SHENZHEN HONOR ELECTRONIC CO.,LTD AS MSA-C2000IC12.0-24P-AU 2 A MOSO POWER SUPPLY TECHNOLOGY CO.,LTD AS MSA-C1500IC12.0-18P-BR 1.5 A MOSO POWER SUPPLY TECHNOLOGY CO.
POE & Wi-Fi Doorbell Camera User Manual Contents 1 Doorbell Appearance .................................................................................. 1 2 Doorbell Installation ................................................................................... 3 2.1 Wiring Description ............................................................................................ 3 2.2 Install TF Card(Optional) ................................................................................... 4 2.
POE & Wi-Fi Doorbell Camera User Manual 1 Doorbell Appearance Front and Side Panels Figure 1-1 Front Panel and Side Panel Table 1-1 Description No.
POE & Wi-Fi Doorbell Camera User Manual Bottom Panel Figure 1-2 Bottom Panel Table 1-2 Description No. Description 7 Power Interface 8 Network Interface 9 Lock Interface Note • Hold the reset button for 5 seconds to switch to Wi-Fi configuration mode. • Hold the reset button for 15 seconds to restore the default settings.
POE & Wi-Fi Doorbell Camera User Manual 2 Doorbell Installation 2.1 Wiring Description Note Make sure you have powered off the main power switch of your home.
POE & Wi-Fi Doorbell Camera User Manual 2.2 Install TF Card(Optional) You can use TF card to store the video files. Steps 1. Remove the card slot cover. 2. Insert the TF card into the card slot on the side of the doorbell. Figure 2-3 Insert the TF Card 3. Cover the TF card slot. Note • Up to 128 G TF card storage. • Motion detection does not support recording without the TF card. • The TF card will be formatted automatically when you power on the doorbell first time. 2.
POE & Wi-Fi Doorbell Camera User Manual Figure 2-4 Insert the Junction Box 4. Hook the doorbell to the wall mounting plate tightly.
POE & Wi-Fi Doorbell Camera User Manual 3 Basic Operation You can configure and operate doorbell via Guarding Vision. 3.1 Set Up Mobile Client Before You Start Make sure your mobile device has been connected to Wi-Fi. Guarding Vision client is necessary for doorbell configuration and operation. Steps 1. Install Guarding Vision client and register a user account for iOS and Android. 1) Search Guarding Vision in App Store or Google PlayTM to download and install the client.
POE & Wi-Fi Doorbell Camera User Manual Note Make sure the doorbell and the mobile device are in the same LAN. - Wired Connection: a. Tap Wired Connection to enter the configuration page. b. Connect the device to a router with a network cable. Note Make sure your mobile device is connected to the same router. - c. Tap Connected and Next to complete network connection settings. Wireless Connection: a. Tap Wireless Connection to enter the configuration page. b. Enter the password of Wi-Fi and tap Next.
POE & Wi-Fi Doorbell Camera User Manual Figure 3-2 Connect to the Hot Spot Note • The password of the hot spot is AP + Verification Code. • By default, the device enabled Wi-Fi AP mode. Or hold the reset button for 5 seconds to enter the Wi-Fi AP mode. 4. Enter the device password and tap Activate.
POE & Wi-Fi Doorbell Camera User Manual system, resetting the password monthly or weekly can better protect your product. • If the doorbell has been activated, skip the step. 5. The account is connected to the device. 3.3 Remote Operation via Client You can realize some certain functions of the doorbell via Guarding Vision (including, but not limited to, live view, and remote playback). Video Intercom Press Doorbell Button on the doorbell.
POE & Wi-Fi Doorbell Camera User Manual Figure 3-4 Live View Playback In the Live View page, tap ... → Playback to playback the videos stored in the TF card. Synchronize Time In the Live View page, tap ... → Settings , you can set the time of doorbell. Tap Time Zone to select the right time zone. Tap Date Format to change the format. Alarm Notification In the Live View page, tap ... → Settings → Alarm Notification to enable Alarm Notification.
POE & Wi-Fi Doorbell Camera User Manual Tap Draw Motion Detection Area and select area. Tap to save. Figure 3-5 Draw Motion Detection Area Tap Motion Detection Sensitivity to adjust the sensitivity.
POE & Wi-Fi Doorbell Camera User Manual Upgrade Tap Device Version to enter the page. Compare the Current Version with Latest Version. Tap Upgrade. Figure 3-7 Upgrade Volume In the Live View page, tap ... → Settings , you can adjust the Loudspeaker Volume and Microphone Volume. Network In the Live View page, tap ... → Settings → Configure Network to connect to network. Storage In the Live View page, tap ... → Settings → Storage Status to check the TF card status.
POE & Wi-Fi Doorbell Camera User Manual Note The doorbell supports 5-second pre-recording when the motion detection is enabled. Notification In the home page of the client, tap Notification to get or edit alarm messages. Note • The messages will be pushed automatically by enabling Message Push Notification. • The client can receive the triggered alarm automatically when the doorbell is powered on by enabling Auto-Receive Alarm after Powering on.
POE & Wi-Fi Doorbell Camera User Manual 4 Remote Operation via Client Software You can configure the doorbell via Guarding Version Client Software remotely. 4.1 Activate Doorbell via Client Software You can activate the doorbell machine remotely through the client software. Steps 1. Run the client software and enter the device management page. The online device will be displayed in the online device list. 2.
POE & Wi-Fi Doorbell Camera User Manual Note • When setting IP address, please keep the IP address of doorbell and the IP address of computer in the same network segment. • After editing the network parameters, the device needs to be re-added to the client. 4.3 Call Indoor Station The device supports connecting the indoor station. After configuring the number of the corresponding indoor station, the indoor station can be called. 4.3.1 Configure Indoor Station No. Steps 1.
POE & Wi-Fi Doorbell Camera User Manual 4.3.2 Linked Indoor Station Steps 1. In the list of added devices, select the device, click Remote Configuration to enter the remote configuration page. 2. Click Intercom → Dial . Figure 4-2 Linked Indoor Station 3. Configure the Room No. of indoor station. 4. Click Save to complete the configuration.
UD12991B-A
