User's Manual

Figure 3-2 Connect to the Hot Spot
Note
•
The pass
word of the hot spot is AP +
Vericaon Code.
•
B
y default, the device enabled Wi-Fi AP mode. Or hold the reset
buon
for 5 seconds to enter the Wi-Fi AP mode.
4.
En
ter the device password and tap Acvate
.
Figure 3-3
Acvate the Doorbell
Note
•
W
e highly recommend you to create a strong password of your own
choosing (using a minimum of 8 characters, including at least three kinds of
following categories: upper case
leers, lower case
leers, numbers, and
special characters) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security
POE & Wi-Fi Doorbell Camera User Manual
8