User's Manual

4 Remote Operaon via Client Soware
You can congure
the doorbell via Guarding Version Client Soware remotely.
4.1 Acvate Doorbell via Client Soware
You can acvate the doorbell machine remotely through the client soware.
Steps
1.
Run the client soware
and enter the device management page. The online
device will be displayed in the online device list.
2.
In the online device list, select the device that needs to be
acvated, clicking
Acvate and the acvaon
window will pop up.
3.
Enter and
conrm the password, clicking OK t
o complete the doorbell acvaon.
Note
We highly recommend you to create a strong password of your own choosing
(using a minimum of 8 char
acters, including at least three kinds of following
categories: upper case leers, lower case leers, numbers, and special
characters) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security
system, reseng the password monthly or weekly can beer protect your
product.
4.2 Edit Network Parameters
Steps
1.
In the online de
vice list, select the acvated device and click E
dit Device
Network Parameters.
Note
The mobile client will automacally search for online devices in the LAN.
2.
E
dit IP Address, Subnet Mask, Gateway and other informaon in the pop-up
dialogue bo
x.
3.
Enter the password and click OK.
POE & Wi-Fi Doorbell Camera User Manual
14