User's Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Safety Instruction
- Regulatory Information
- 1 Appearance Description
- 2 Terminal and Wiring Description
- 3 Installation
- 4 Activation
- 5 Local Operation
- 6 Remote Configuration via Web
- 7 Configuration via Client Software
- A. Communication Matrix and Device Command
Enter 【# + Public P
assword + #】to unlock the door.
5.3.2 Unlock by Presenng Card
Note
Make sure you have issued the card to the device.
Present the card on the card reading area to unlock.
Note
You cannot unlock the door by presenng the main card.
5.3.3 Unlock by Fingerprint
Note
•
Mak
e sure you have added the ngerprint to the device.
•
Fing
erprint funcon may vary with dierent modules. Please refer to the actual
de
vices.
Put your
nger on the nger recognion module to unlock.
5.3.4 Unlock by QR Code
The device supports unlocking by QR code. You can use the camera to scan the QR
code which is created via mobile client.
Steps
Note
•
Mak
e sure the door staon has been added to the indoor staon.
•
Mak
e sure the indoor
staon is connected to Wi-Fi.
•
Make sure the door staon has issued the card and connected to the indoor
staon.
1.
Sear
ch and install the Hik-Connect to your mobile phone.
2.
Register and login the client according to the noce on the page.
3.
Sc
an the QR code/bar code on the device or enter the serial No. manually to add
the indoor staon.
4.
Cr
eate a QR code.
Video Intercom D Series Door Staon User Manual
29