User's Manual

Figure 6-4 TCP/IP Sengs
2.
Congure
the network parameters.
-
Check DHCP, the device will get the parameters automacally.
-
Se
t the IPv4 Address, IPv4 Subnet Mask and IPv4 Default Gateway
manually.
3.
Congure
the DNS server.
4.
Click Save to enable the sengs.
Port
Sengs
Steps
1.
Click Network → Basic Sengs → P
ort to enter the sengs page.
Figure 6-5 Port Sengs
2.
Se
t the ports of the device.
HTTP Port
The default port number is 80, and it can be changed to any port No. which
is not occupied.
RTSP Port
Video Intercom D Series Door Staon User Manual
37