User's Manual

2.
Select the door and edit the door name.
3.
Se
t door contact status.
4.
Set lock
acon me.
5.
Click Sa
ve to enable the sengs.
Card Security
Click Access Con
trol → Card Security to enter the sengs page.
Slide to enable card encrypon parameters. Click Save to enable the sengs.
Elevator Control
Before You Start
•
Make sure your door staon is in the mode of main door staon. Only the main
door staon support elevator control funcon.
•
Mak
e sure your door staon has been connected to the elevator controller via
R
S-485 wire if you want to use RS-485 interface.
Steps
1.
Click Access Control → Elevator Control to enter the corresponding
conguraon page.
Video Intercom D Series Door Staon User Manual
51