User's Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Safety Instruction
- Regulatory Information
- 1 Appearance Description
- 2 Terminal and Wiring Description
- 3 Installation
- 4 Activation
- 5 Local Operation
- 6 Remote Configuration via Web
- 7 Configuration via Client Software
- A. Communication Matrix and Device Command
You can add many devices at once whose IP addresses are among the IP segment.
St
eps
1.
Click +Add to pop up the dialog box.
2.
Select IP Segment as Adding Mode.
3.
Enter corresponding informaon, and click Add.
7.3 Remote
Conguraon
Select the device, click
to
congure the parameters remotely.
7.4 Device Management
Device management includes device acvaon, adding device, eding device, and
deleng device, and so on.
Aer running the iVMS-4200, video intercom devices should be added to the client
soware for remote conguraon and management.
7.5 Organizaon Management
On the main page of the Client Soware, click
P
ersonalManagement to enter
the conguraon page.
7.5.1 Add Organizaon
Steps
1.
In the organizaon list on the le, click +Add.
2.
En
ter the
Organizaon Name as desired.
3.
Click OK to save the adding.
4.
Oponal: Y
ou can add mulple levels of organizaons according to the actual
needs.
1) You can add mulple levels of organizaons according to the actual needs.
2) Then the added organizaon will be the sub-organizaon of the upper-level
organizaon.
Video Intercom D Series Door Staon User Manual
56