User's Manual

Steps
Note
This funcon is only supported by the device the connecon mothod of which is
T
CP/IP when adding the device.
1.
In the
organizaon list on the le, click to select an organizaon to import the
persons.
2.
Click Get from Device to pop up the dialog box.
3.
The added device will be displayed.
4.
Click to select the device and then click Get to start geng the person
informaon from the device.
Note
•
The per
son informaon, including person details, person's ngerprint
in
formaon (if congured), and the linked card (if congured), will be
imported to the selected organizaon.
•
If the per
son name stored in the device is empty, the person name will be
lled with the issued card No. aer
imporng to the client.
•
The gender of the persons will be Male by default.
7.6.5 Change Person to Other Organizaon
You can move the person to another organizaon if needed.
St
eps
1.
Select the person in the list and click Change Organizaon.
2.
Select the
organizaon to move the person to.
3.
Click OK to save the
sengs.
7.6.6 Add Person in Batch
Enter a short
descripon of your task here (oponal).
Before You Start
Enter the prerequisites here (oponal).
Enter the context of your task here (oponal).
Steps
1.
Enter your rst step here.
Video Intercom D Series Door Staon User Manual
60