User's Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Safety Instruction
- Regulatory Information
- 1 Appearance
- 2 Terminal and Wiring Description
- 3 Installation
- 4 Activation
- 5 Local Operation
- 6 Configuration via Client Software
- A. Communication Matrix and Device Command
Figure 2-2 Door Lock Wiring
Note
•
Terminal NC1/COM1 is set as default for accessing electric bolt. Terminal NO1/
COM1 is set as default for accessing electric strike.
•
To connect electric lock in terminal NO2/COM2/NC2, it is required to set the
output of terminal NO2/COM2/NC2 to be electric lock with iVMS-4200 Client
Soware.
2.2.2 Exit Buon Wiring
Wire the BTN1/BTN2 terminal with the door contact.
Here takes BTN1 for example.
Figure 2-3 Exit
Buon Wiring
Video Intercom Face Recognion Door Staon with 4.3-inch Screen User Manual
6