User's Manual

4
Acvaon
4.1 Acvate Device Locally
You are required to acvate the device rst by sengs a strong password for it
before you can use the device.
Steps
1.
Power on the device to enter the acvaon page automacally.
2.
Cr
eate a password and conrm it.
3.
T
ap OK to acvate the door staon.
4.2 Acvate Device via Client Soware
You can only congure and operate the door staon aer creang a password for
the de
vice acvaon.
Default parameters of door staon are as follows:
•
De
fault IP Address: 192.0.0.65.
•
Default Port No.: 8000.
•
Default User Name: admin.
Steps
1.
Run the client soware, click Main
tenance and Management → Device
Management → Device to enter the page.
2.
Click Online Device.
3.
Select an inacvated device and click Acvate.
4.
Cr
eate a password, and conrm the password.
Note
We highly recommend you to create a strong password of your own choosing
(using a minimum of 8 char
acters, including at least three kinds of following
categories: upper case leers, lower case leers, numbers, and special
characters) in order to increase the security of your product. And we
recommend you change your password regularly, especially in the high security
system, changing the password monthly or weekly can beer protect your
product.
Video Intercom Face Recognion Door Staon with 4.3-inch Screen User Manual
11