User's Manual

Note
•
F
or door staon, there are 4 I/O input terminals. By default, Terminal 1 and 2
c
orrespond to Door Status. Terminal 3 and 4 correspond to interfaces of
Door Switch.
•
For door staon, there are 2 I/O Output Terminals. Terminal 1 and 2
c
orrespond to Door interfaces (NO1/COM/NC1; NO2/COM/NC2) of door
staon. Door 1 is enabled by default. You can enable/disable IO Out
according to needs.
Volume Input and Output
Steps
1.
Click V
olume Input/Output to enter the volume input and output page.
2.
Slide the slider to adjust the Volume Input and Volume Output.
3.
Click Save to enable the sengs.
Face and Fingerprint Sengs
Steps
1.
Click F
ace and Fingerprint to enter the
sengs page.
2.
Congure
the parameters.
3.
Click Save to enable the sengs.
Adversement
Sengs
Steps
1.
Click Adversement to enter the sengs page.
2.
Select the Mode.
3.
Click + t
o add the picture.
4.
Slide to set the duraon.
5.
Click Sa
ve to enable the sengs.
Video Intercom Face Recognion Door Staon with 4.3-inch Screen User Manual
27