User's Manual

If the added device has been congured with person informaon (including person
de
tails, ngerprint, issued card informaon), you can get the person informaon
from the device and import to the client for further operaon.
Steps
Note
This funcon is only supported by the device the connecon mothod of which is
T
CP/IP when adding the device.
1.
In the organizaon list on the le, click to select an organizaon to import the
per
sons.
2.
Click Get from Device to pop up the dialog box.
3.
The added device will be displayed.
4.
Click to select the device and then click Get to start geng the person
informaon from the device.
Note
•
The person informaon, including person details, person's ngerprint
in
formaon (if congured), and the linked card (if congured), will be
imported to the selected organizaon.
•
If the per
son name stored in the device is empty, the person name will be
lled with the issued card No. aer
imporng to the client.
•
The gender of the persons will be Male by default.
6.6.5 Change Person to Other Organizaon
You can move the person to another organizaon if needed.
St
eps
1.
Select the person in the list and click Change Organizaon.
2.
Select the
organizaon to move the person to.
3.
Click OK to save the
sengs.
6.6.6 Add Person in Batch
Enter a short
descripon of your task here (oponal).
Before You Start
Enter the prerequisites here (oponal).
Video Intercom Face Recognion Door Staon with 4.3-inch Screen User Manual
37