User's Manual

Table Of Contents
Safety
Instrucon
Warning
All the electr
onic operaon should be strictly compliance with the electrical
sa
fety regulaons, re prevenon regulaons and other related regulaons in
your local region.
Please use the power adapter, which is provided by normal company. The power
consumpon cannot be less than the required value.
Do not c
onnect several devices to one power adapter as adapter overload may
cause over-heat or re hazard.
Please mak
e sure that the power has been disconnected before you wire, install
or dismantle the device.
When the product is installed on wall or ceiling, the device shall be rmly xed.
If smok
e, odors or noise rise from the device, turn o the power at once and
unplug the po
wer cable, and then please contact the service center.
If the product does not work properly, please contact your dealer or the nearest
service center. Never aempt to disassemble the device yourself. (We shall not
assume an
y responsibility for problems caused by unauthorized repair or
maintenance.)
Cauon
Do not dr
op the device or subject it to physical shock, and do not expose it to
high electromagnesm radiaon. Avoid the equipment installaon on vibraons
surface or places subject to shock (ignorance can cause equipment damage).
Do not place the de
vice in extremely hot (refer to the specicaon of the device
f
or the detailed operang temperature), cold, dusty or damp locaons, and do
not expose it to high electromagnec radiaon.
The de
vice cover for indoor use shall be kept from rain and moisture.
Exposing the equipment to direct sun light, low venlaon or heat source such
as hea
ter or radiator is forbidden (ignorance can cause re danger).
Do not aim the device at the sun or extra bright places. A blooming or smear
may occur otherwise (which is not a malfuncon however), and aecng the
endur
ance of sensor at the same me.
Video Intercom Face Recognion Door Staon with 4.3-inch Screen User Manual
iv