User's Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Safety Instruction
- Regulatory Information
- 1 Appearance Description
- 2 Terminal and Wiring Description
- 3 Installation
- 4 Activation
- 5 Door Station Local Operation
- 6 Remote Configuration via Web
- 7 Remote Configuration via Client Software
- 8 Batch Configuration Tool
- A. Communication Matrix and Device Command
Steps
1. P
aste the mounng template on the wall according to the installaon
requirements. Drill holes according to the template. Insert the expansion bolts
into the screw holes.
2. Fix the mounng plate to the wall with 4 supplied screws.
Figure 3-15 Fix Mounng Plate
3. Wir
e the device and cover the rear panel with 2 screws. Apply Sillicone sealant
among the joints.
Figure 3-16 Seal Rear Panel
4. Fix the de
vice to the mounng plate and x the device with the set screw.
Video Intercom Face Recognion Door Staon User Manual
17