User's Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Safety Instruction
- Regulatory Information
- 1 Appearance Description
- 2 Terminal and Wiring Description
- 3 Installation
- 4 Activation
- 5 Door Station Local Operation
- 6 Remote Configuration via Web
- 7 Remote Configuration via Client Software
- 8 Batch Configuration Tool
- A. Communication Matrix and Device Command
●
De
fault IP Address: 192.0.0.65.
●
Default Port No.: 8000.
●
Default User Name: admin.
Steps
1. Run the client soware, click Maintenance and Management → Device
Management → Device to enter the page.
2. Click Online Device.
3. Select an inacvated device and click Acvate.
4. Create a password, and conrm the password.
Note
We highly recommend you to create a strong password of your own choosing
(using a minimum of 8 char
acters, including at least three kinds of following
categories: upper case leers, lower case leers, numbers, and special characters)
in order to increase the security of your product. And we recommend you change
your password regularly, especially in the high security system, changing the
password monthly or weekly can beer protect your product.
5. Click OK t
o acvate the device.
Note
●
When the de
vice is not acvated, the basic operaon and remote operaon of
de
vice cannot be performed.
●
You can hold the Ctrl or Shi key to select mulple devices in the online
de
vices, and click the
Acvate buon to acvate devices in batch.
4.4 Acvate Device via Web
You are required to acvate the device
rst by seng a strong password for it before
you can use the device.
Default parameters of the door staon are as follows:
●
Default IP Address: 192.0.0.65.
●
Default Port No.: 8000.
●
Default User Name: admin
Steps
1. Power on the device, and connect the device to the network.
Video Intercom Face Recognion Door Staon User Manual
23