User's Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Safety Instruction
- Regulatory Information
- 1 Appearance Description
- 2 Terminal and Wiring Description
- 3 Installation
- 4 Activation
- 5 Door Station Local Operation
- 6 Remote Configuration via Web
- 7 Remote Configuration via Client Software
- 8 Batch Configuration Tool
- A. Communication Matrix and Device Command
Number of Underground Floor, and se
t Interface Type as RS-485 or
Network Interface. Enable elevator control.
In batch conguraon tool, tap Door Staon Remote Conguraon →
System → RS-485 to enter RS-485 sengs page and set elevator control
type.
Call Resident from Outer Door Staon
On the main page of the outer door staon, tap Call to enter the calling
pag
e.
Enter Phase No. + # + Building No. + # + Unit No. + # + Room No., and tap
Call again to call residents.
Enter Phase No. + # + Building No. + # + Unit No. + # + Room No., and tap
Call again to call residents.
Enter Phase No. + # + Building No. + # + Unit No. + # + Room No., and tap
Call again to call residents.
Enter Phase No. + # + Room No., and tap Call again to call residents.
5.2.2 Call Center
Tap
on the main/sub door staon page to enter the calling page.
T
ap
to call management center administrator. Tap cancel buon to cancel during
c
alling management center.
5.3 Unlock Door
You can unlock door staon in following methods: Unlock by password, unlock by
presenng card, unlock by face, and unlock by ngerprint.
5.3.1 Unlock by Password
Unlock by Password
On the menu page, Tap
to enter the calling page.
Video Intercom Face Recognion Door Staon User Manual
26