User's Manual

Figure 6-6 TCP/IP Sengs
2. Congure
the network parameters.
-
Check DHCP, the device will get the parameters automacally.
-
Se
t the IPv4 Address, IPv4 Subnet Mask and IPv4 Default Gateway manually.
3. Congure
the DNS server.
4. Edit Alarm Center IP and Alarm Host Port.
5. Click Save to enable the sengs.
Port Sengs
Steps
1. Click Network → Basic Sengs → Port to enter the sengs page.
2. Set the ports of the device.
Video Intercom Face Recognion Door Staon User Manual
37