User's Manual

2. Check Enable FTP.
3. Select Ser
ver Type.
4. Input the Server IP Address and Port.
5. Congure the FTP Sengs, and the user name and password are required for the
server login.
6. Set the Directory Structure, Parent Directory and Child Directory.
7. Set the picture naming rules.
8. Click Save to enable the sengs.
Plaorm Access
Plaorm access provides you an opon to manage the devices via plaorm.
Steps
1. Click Conguraon → Ne
twork → Advanced Sengs → Plaorm Access to enter
the sengs page.
Figure 6-9 Plaorm Access
2. Select plaorm access mode.
3. Check Enable, congure the server IP address and set Access Server IP Address
and Vericaon Code.
4. Click Save to enable the sengs.
Video Intercom Face Recognion Door Staon User Manual
40