User's Manual

Steps
1. Go t
o Intercom → Session Sengs to enter the sengs page.
2. Set Register Number and Registraon Password.
3. Set Main Staon IP and VideoIntercom Server IP.
4. Enable Protocol 1.0.
5. Click Save to enable the sengs.
Time Parameters
Click Intercom → Time Parameters to enter the page.
Congure the me parameters and click Save.
Note
●
F
or door staon, maximum speaking me and maximum message me should be
congured.
●
Maximum speaking me varies from 90s to 120s, and maximum message me
varies from 30s to 60s.
Number Sengs
Steps
1. Click In
tercom → Number Sengs , and you can view the No., room No., and SIP
number.
2. Add the number.
1) Click Add.
2) Enter Room No., and SIP.
3) Oponal: Click Add to add SIP according to the actual needs.
4) Click OK.
3.
Oponal: Click
to edit the number.
6.4.7 Access Control Sengs
Permission Password
Video Intercom Face Recognion Door Staon User Manual
49