User's Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Safety Instruction
- Regulatory Information
- 1 Appearance Description
- 2 Terminal and Wiring Description
- 3 Installation
- 4 Activation
- 5 Door Station Local Operation
- 6 Remote Configuration via Web
- 7 Remote Configuration via Client Software
- 8 Batch Configuration Tool
- A. Communication Matrix and Device Command
Figure 6-16 Door Parameters
2. Select Door No., and edit the Name.
3. Se
t Lock Acon Time.
4. Select Door Contact as Remain Closed or Remain Open.
5. Click Save to enable the sengs.
Card Security
Click Access Control → Card Security to enter the sengs page.
Slide to enable card encrypon parameters.
Click Save to enable the sengs.
Elevator Control
Before You Start
Make sure that the door staon is in the mode of main door staon. Only the main
door staon supports elevator control funcon.
Steps
1. Click Access Con
trol → Elevator Control Parameter to enter the sengs page.
Video Intercom Face Recognion Door
Staon User Manual
51