User's Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Safety Instruction
- Regulatory Information
- 1 Appearance Description
- 2 Terminal and Wiring Description
- 3 Installation
- 4 Activation
- 5 Door Station Local Operation
- 6 Remote Configuration via Web
- 7 Remote Configuration via Client Software
- 8 Batch Configuration Tool
- A. Communication Matrix and Device Command
7 Remote Conguraon via Client
Soware
You can set Video Intercom system and manage video intercom products including
indoor staon, door staon and main staon via iVMS-4200 client soware.
7.1 Edit Device Network Parameters
Before You Start
Be
fore conguring the device remotely, make sure that the device is acvated.
Steps
1. On the person management page, click Online Device.
2.
Click
to pop up the network parameter sengs page.
3. E
dit the device IP address, subnet mask, default gateway, etc.
4. Enter the device acvaon password.
5. Click Sa
ve to enable the sengs.
Note
Please keep the device IP address and the local computer IP address in the same
ne
twork segment.
7.2 Add Device
You can add devices via the following methods: add device online, add device via IP
addr
ess, add device via IP segment, add device in batch, and add device via EHome.
7.2.1 Add Online Device
Steps
1. Click Online Device.
2. In the online device area, select an acvated online device, or press the Shi or
Ctrl to select mulple acvated online devices.
3. Click Add.
Video Intercom Face Recognion Door Staon User Manual
57