User's Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Safety Instruction
- Regulatory Information
- 1 Appearance Description
- 2 Terminal and Wiring Description
- 3 Installation
- 4 Activation
- 5 Door Station Local Operation
- 6 Remote Configuration via Web
- 7 Remote Configuration via Client Software
- 8 Batch Configuration Tool
- A. Communication Matrix and Device Command
7.7.1 Add Person
Steps
1. On the main pag
e of the client, click Person Management to enter the person
informaon conguraon page.
2. Select an organizaon in the organizaon list and click Add on the person panel to
pop up the adding person dialog.
Note
The Person No. will be generated automacally, and it is editable.
3. Se
t the person basic informaon.
1) Enter basic informaon: name, gender, tel, eecve period and E-mail address.
Note
Up to 15 characters are allowed for person name.
2) Click Add f
ace to upload the photo.
Note
The picture should be in *.jpg format.
Upload Click Upload, select the per
son picture from the local PC to
upload it to the client.
Take Photo Click T
ake Photo, and slide to enable device vericaon. Aer
the face collector is inialized successfully, you can take a
photo to obtain a face picture.
Remote
Collecon
Click R
emote Collecon, select the collecon device, click the
photo to get the photo, and click OK to complete the
collecon.
4. Issue the card for the person.
1) Click Credenal → Card.
2) Click + to pop up the Add Card dialog, select Normal Card as Card Type, and
enter the Card No.
3) Click Read and the card(s) will be issued to the person.
5. Add ngerprint permissions for the person.
1) Click Credenal → Fingerprint.
2) Select
Collecon Mode and Collecon Recorder.
Video Intercom Face Recognion Door Staon User Manual
61