User's Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Safety Instruction
- Regulatory Information
- 1 Appearance Description
- 2 Terminal and Wiring Description
- 3 Installation
- 4 Activation
- 5 Door Station Local Operation
- 6 Remote Configuration via Web
- 7 Remote Configuration via Client Software
- 8 Batch Configuration Tool
- A. Communication Matrix and Device Command
You can set the informaon type as all, adversing Informaon, property
informaon, alarm
informaon or noce informaon according to your needs.
Time
Set the start me and end me of a me period to search the logs.
3. Click Save.
4. Oponal: You can reset the sengs or export the noce aer the search.
Reset the
Sengs Click Reset to reset all the congured search condions.
Export Search
R
esults
Click Export to export the noces to your PC.
7.8.3 Upload Arming Informaon
Steps
1. On the upper-right corner of menu page of the client soware, click
→ Tool
→ De
vice Arming Control to enter the sengs page.
2. Slide the slider to set the arming state of the device.
Cauon
●
When the de
vice is added to the client soware, the client soware will
automacally establish an arming connecon, and the device is automacally in
the arming state.
●
Only support 1-channel arming connecon. If the device is added to client
soware A and the automac arming is successful, the arming connecon
cannot be established if you add device to client soware B at this me. The
alarm informaon will only be uploaded to client soware A.
Note
●
Aer the arming
seng, when an alarm occurs, the alarm informaon can be
automacally uploaded to the client soware.
●
Aer the arming seng, you can view alarm records in the alarm events page.
●
When adding device to the client soware, the device will automacally enter
arming state by default.
3. Oponal: Click Arm All or Disarm All
to arm or disarm devices.
Video Intercom Face Recognion Door Staon User Manual
67