User's Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Safety Instruction
- Regulatory Information
- 1 Appearance Description
- 2 Terminal and Wiring Description
- 3 Installation
- 4 Activation
- 5 Door Station Local Operation
- 6 Remote Configuration via Web
- 7 Remote Configuration via Client Software
- 8 Batch Configuration Tool
- A. Communication Matrix and Device Command
8 Batch Conguraon Tool
Y
ou can only congure and operate the door staon aer creang a password for
the device acvaon.
Default parameters of door staon are as follows:
●
Default IP Address: 192.0.0.65.
●
Default Port No.: 8000.
●
Default User Name: admin.
8.1 Create the Organizaon Structure
In the batch conguraon tool sengs page, click Flash Rom to enter the sengs
page. Through the reboong tool, you can complete the network conguraon,
associated network conguraon and room No. conguraon of all indoor staons
in a community in batches, and quickly realize the communicaon
between the
indoor staons in the community and the door staon, main staon, and central
plaorm.
8.1.1 Create Community Structure
Steps
1. Click Flash Tool to enter the page.
2. On the ashing tool page, according to the actual situaon of the community,
edit/display area in the community structure, and create the community structure
(including district, building, unit, building, oor and room).
Note
●
Click Dele
te to delete all community structure.
●
Click + or - to expand or collapse the community structure list. You can also
select a structure and click Expand All or Collapse All to expand or collapse
community structure list.
8.1.2 Door Staon Flash
Video Intercom Face Recognion Door
Staon User Manual
68