User's Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Safety Instruction
- Regulatory Information
- 1 Appearance Description
- 2 Terminal and Wiring Description
- 3 Installation
- 4 Activation
- 5 Door Station Local Operation
- 6 Remote Configuration via Web
- 7 Remote Configuration via Client Software
- 8 Batch Configuration Tool
- A. Communication Matrix and Device Command
Link Main Door Staon
Steps
1. Select the c
ommunity structure. Here takes building 1 (with 1 unit, 1 oor, 2
rooms) as an example.
Figure 8-1 Link Main Door Staon
2. Se
t the starng IP address of main door staon (The default starng IP is paired
with the unit 1 sub door staon).
3. Click Calculate to get the end IP address of door staon and main door staon No.
(such as 1-1-1-1). The ending IP address depends on the number of units in
selected structure.
4. Set the corresponding network informaon. Set the SIP server IP address, main
staon IP address, central plaorm IP address and port No. Set the subnet mask
and gateway address.
5. In the online device area, select a door staon, enter the login password, and click
R
oot.
Video Intercom Face Recognion Door Staon User Manual
69