User's Manual

4. Se
t the corresponding network informaon. Set the main door staon IP address,
SIP server IP address, main staon IP address, central plaorm IP address and port
No. Set the subnet mask and gateway address.
5. In the online device area, select a door staon, enter the login password, and click
Root. At this me, the corresponding No. (such as 1-1-1-1) and IP address of the
sub door staon are generated.
Cauon
●
During the roong process, if the sub door staon has been acvated locally on
the de
vice or the conguraon tool, the login password entered here is the
acvaon password.
●
During the roong process, if the sub door staon is not acvated, then
entering the login password here is to set a password by yourself. At the same
me as the roong, the sub door staon will be acvated.
8.2 Upgrade in Batch
In the batch tool sengs page, clickUpgr
ade in Batchto enter the page. Through
upgrading in batch, you can upgrade mulple intercom devices in batch.
Figure 8-3 Batch Upgrading
Video Intercom Face Recognion Door Staon User Manual
71