User's Manual

Video Intercom Card Reader Module·Quick Start Guide
48
4 Remote Operation
4.1 Activate Main Unit
Card reader module cannot work alone. It need to use together with main unit.
You need to activate the main unit first.
You can configure and operate the video intercom devices via iVMS-4200.
Default parameters of door station are as follows:
 Default IP Address: 192.0.0.65.
 Default Port No.: 8000.
 Default User Name: admin.
Steps:
1. Run iVMS-4200, enter Device Management, check the Online Device area.
2. Select an inactivated device and click the Activate button.
3. Create a password, and confirm the password.