User's Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Safety Instruction
- Regulatory Information
- 1 Appearance
- 2 Terminal and Wiring Description
- 3 Installation
- 4 Activation
- 5 Remote Configuration via Web
- 5.1 Live View
- 5.2 User Management
- 5.3 Number Settings
- 5.4 Device Management
- 5.5 Parameters Settings
- 6 Configuration via Client Software
- A. Communication Matrix and Device Command
- 空白页面
Set the saving path of the manually captured pictures in live view mode.
Note
You can click Browse
to change the directory for saving the clips and
pictures, and click Open to open the set folder of clips and picture saving.
Click Save to enable the settings.
5.5.2 Sys
tem Settings
Follow the instructions below to configure the system settings, include System
Settings, Maintenance, Security, and User Management, etc.
Click System to enter the settings page.
Basic Information
Click System Settings → Basic Information to enter the settings page. On
the page, you can edit Device Name and Device No. Set the Language and
System Type according to your needs.
Click Save to enable the settings.
Time Settings
Click System Settings → Time Settings to enter the settings page. Select the
Time Zone of your location from the drop-down list.
•
Enable NTP, set the Server Address, NTP Port and Interval.
•
Enable Manual Time Sync., set the time manually or check the S
ync.
with computer
time.
Click Save to enable the settings.
DST
Click System Settings → DS
T to check Enable DST. Set the parameters
according to your needs and click Save to enable the settings.
Maintenance
Click Maintenance → Upgrade & Maintenance to enter the settings page.
Video Intercom Villa Door Station User Manual
16