User's Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Safety Instruction
- Regulatory Information
- 1 Appearance
- 2 Terminal and Wiring Description
- 3 Installation
- 4 Activation
- 5 Remote Configuration via Web
- 5.1 Live View
- 5.2 User Management
- 5.3 Number Settings
- 5.4 Device Management
- 5.5 Parameters Settings
- 6 Configuration via Client Software
- A. Communication Matrix and Device Command
- 空白页面
Figure 5-18 Door Parameters
2.
Select the door and edit the door name.
3.
Se
t door cont
act status.
4.
Set lock
action
time.
5.
Click Save
t
o enable the settings.
Card Security
Go to Access Con
tr
ol
→ Card Security to enter the settings page.
Slide to enable card encryption parameters and CPU card reading content. Click Save
to enable the settings.
Elevator Control
Before You Start
•
Make sure your door station is in the mode of main door station. Only the main
door station support elevator control function.
•
Mak
e sur
e y
our door s
tation has been connected to the elevator controller via
RS-485 wire if y
ou want to use RS-485 interface.
Steps
1.
Click Access Control → Elevator Control to enter the corresponding
configuration page.
Video Intercom Villa Door Station User Manual
36