User's Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Safety Instruction
- Regulatory Information
- 1 Appearance
- 2 Terminal and Wiring Description
- 3 Installation
- 4 Activation
- 5 Remote Configuration via Web
- 5.1 Live View
- 5.2 User Management
- 5.3 Number Settings
- 5.4 Device Management
- 5.5 Parameters Settings
- 6 Configuration via Client Software
- A. Communication Matrix and Device Command
- 空白页面
Safety Instruction
Warning
•
The working tempera
ture of the device is from -10 ºC to 55 ºC.
•
All the electronic operation should be strictly compliance with the electrical
sa
fety
regulations, fire prevention regulations and other related regulations in
your local region.
•
Please use the power adapter, which is provided by normal company. The power
consumption cannot be less than the required value.
•
Do not c
onnect se
v
er
al devices to one power adapter as adapter overload may
cause over-heat or fire
hazard.
•
Please mak
e sur
e tha
t the power has been disconnected before you wire, install
or dismantle the device.
•
When the product is installed on wall or ceiling, the device shall be firmly fixed.
•
If smok
e, odors or noise rise from the de
vice, turn off the power at once and
unplug the power cable, and then please c
ontact the service center.
•
If the product does not work properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the device yourself. (We shall not
assume an
y r
esponsibility f
or pr
oblems caused by unauthorized repair or
maintenance.)
Caution
•
Do not drop the device or subject it to ph
ysical shock, and do not expose it to
high electromagnetism radiation. Avoid the equipment installation on vibrations
surface or places subject to shock (ignor
ance can cause equipment damage).
•
Do not place the device in extremely hot (refer to the specification of the device
f
or the de
t
ailed
operating temperature), cold, dusty or damp locations, and do
not expose it to high electromagnetic radiation.
•
The device cov
er for indoor use shall be kept from rain and moisture.
•
Exposing the equipment to direct sun light, low ventilation or heat source such
as hea
ter or radia
tor is forbidden (ignorance can cause fire danger).
•
Do not aim the device at the sun or extra bright places. A blooming or smear
may occur otherwise (which is not a malfunction however), and affecting the
endur
ance of sensor a
t the same
time.
Video In
tercom Villa Door Station User Manual
iv