User's Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Safety Instruction
- Regulatory Information
- 1 Appearance
- 2 Terminal and Wiring Description
- 3 Installation
- 4 Activation
- 5 Remote Configuration via Web
- 5.1 Live View
- 5.2 User Management
- 5.3 Number Settings
- 5.4 Device Management
- 5.5 Parameters Settings
- 6 Configuration via Client Software
- A. Communication Matrix and Device Command
- 空白页面
Note
Run the browser, click → Internet Options → Security to disable the Protect
ed
Mode.
5.5.1 Local Parameters Settings
You can
configure the parameters of the live view, record files and captured pictures.
The record files and captured pictures are the ones you record and capture by using
the web browser. You can also set and view the saving paths of the captured pictures
and recorded videos on the PC that running the web browser.
Live View Parameters
Stream Type
Set the stream type as Main Stream or Sub-stream.
Play Performance
Set the live view performance to Shortest Delay, Balanced or Fluent.
Auto Start Live View
Check Yes to enable the function.
Image Format
Select the image format for picture capture.
Click Save to enable the settings.
Record File Parameters
Record File Size
Select the packed size of the manually recorded and downloaded video
files to 256M, 512M or 1G. After the selection, the maximum record file
size is the value you selected.
Save record files to
Set the saving path for the manually recorded video files.
Click Save to enable the settings.
Picture and Clip Settings
Sa
ve snapshots in live view to
Video Intercom Villa Door Station User Manual
15