User's Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Safety Instruction
- Regulatory Information
- 1 Appearance
- 2 Terminal and Wiring Description
- 3 Installation
- 4 Activation
- 5 Remote Configuration via Web
- 5.1 Live View
- 5.2 User Management
- 5.3 Number Settings
- 5.4 Device Management
- 5.5 Parameters Settings
- 6 Configuration via Client Software
- A. Communication Matrix and Device Command
- 空白页面
5.5.3 Network Settings
TCP/IP Settings
T
CP/IP settings must be properly configured before you operate the device over
network. The device supports IPv4.
Steps
1.
Click Network → Basic Settings → TCP/IP to enter the settings page.
Figure 5-4 TCP/IP Settings
2.
Configure the network parameters.
-
Check DHCP, the device will get the par
ameters automatically.
-
Set the IPv4 Address
, IPv4 Subnet Mask and IPv4 Default Gateway
manually.
3.
Configure the corresponding DNS server parameters.
Video Intercom Villa Door Station User Manual
19