Quick Start Guide

DS-3WF02C-5N/O Quick Start Guide DS-3WF02C-5N/O Quick Start Guide
Indicator
Physical Interface
Figure 1-2 Indicators
Table 1-2 Indicator Description
Chapter 1 Introduction
1.1 Overview
1.2 Packing List
1.3 Appearance
1.3.1 Front Panel
Table 1-1 Packing List of DS-3WF02C-5N/O
Figure 1-1 DS-3WF02C-5N/O Front Panel
Front Panel of DS-3WF02C-5N/O
DS-3WF02C-5N/O wireless bridge can be applied in industries, such as wireless video
surveillance, railway, transportation, power and other industries, wireless video/data transmis-
sion, wireless coverage, carrier wireless backbone network construction, Wi-Fi wireless
coverage, rural information construction, and wireless network coverage. The long-distance
transmission of the device can guarantee multi-channel HD video transmission.
Indicators are used to monitor the status of the DS-3WF02C-5N/O. See the following table for
the description of the indicators.
The hardware interfaces of the DS-3WF02C-5N/O are as follows.
The packing list is shown as below. If any accessories are damaged or lost, keep the package
intact and contact your dealer for replacement.
Front panel of DS-3WF02C-5N/O is shown as below.
Name Item Quantity
Device DS-3WF02C-5N/O
1
PoE Adapter 24 V, 0.5 A 1
Power Cord Power Cord 1
Hoop Hoop for mounng device 1
Quick Start Guide Instrucon manual 1
Power indicator.
If the green light is steady on, it indicates that the power is on.
Network connecon light.
The light indicates there is one IPC or other network device connects to the LAN port of PoE
adapter.
Blinking means sending data.
Wireless indicator light.
The light indicates that the wireless is enabled.
Blinking means sending data.
Signal strength indicator light.
Red light on, indicang that the signal is weak or no signal.
Yellow and red lights on, indicang signal level is medium.
Green, yellow and red lights on, indicang the wireless signal level is strong
Indicator
Descripon
LAN
WLAN
The network cable is connected to the “POE” on the PoE power module to provide
power and data transmission to the device.
Used to restore the default factory sengs.
The reserved network port can be connected to front-end network devices such as IPC.
Physical Interface
Descripon
LAN
Reset
POE
Figure 1-3 Physical Interface
Table 1-3 Physical Interface
1 2