User's Manual

3. You can do the following operaons on this interface.
-
Select the arming mode. Le
vel 1 Arming can only connect one client or web. The uploaded
pictures will not be stored in the storage card. The pictures in the storage card will be
uploaded to the level 1 arming. Level 2 Arming can connect three clients or webs. The
pictures will be uploaded to the client/web, and stored in the storage card. Disarming is to
cancel the alarm status or real-me picture.
-
Click Measuring license pla
te to measure the license plate pixel. Aer the measurement,
click Close measurement.
-
Click Enable Rule to enable rule when measuring the license plate. Aer the measurement,
click Disable Rule.
-
Click Capture to enable manual capture. The captured pictures will be saved in the set local
path. Or you can click Open Folder to view the pictures.
-
Click on the right of Connuous Capture to set the connuous capture parameters. Aer
the conguraon, click Connuous Capture to capture pictures.
Capture Times
Up to ve mes are supported.
Connuous Capture Interval
Up to four intervals are supported. You can set the me of each interval.
Parking Camera User Manual
8