User's Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Safety Instruction
- Chapter 1 Introduction
- Chapter 2 Activation
- Chapter 3 Login
- Chapter 4 Capture Configuration
- Chapter 5 Parking Space Detection
- Chapter 6 Live View and Local Configuration
- Chapter 7 Storage
- Chapter 8 Encoding and Display
- Chapter 9 Network Configuration
- Chapter 10 Serial Port Configuration
- Chapter 11 Alarm Configuration
- Chapter 12 Safety Management
- Chapter 13 Maintenance
It refers to the port of real-me streaming protocol.
SDK Port
It refers to the port through which the client adds the device.
9.5 Set Bluetooth
You can enable Bluetooth to upload the parking space informaon to the plaorm.
Steps
Note
Some models do not support Bluetooth. The actual device prevails.
1. Go t
o Conguraon → Device Conguraon → Bluetooth .
Figure 9-5 Set Bluetooth
2. Check Enable Blue
tooth.
3. Set the Bluetooth parameters according to the plaorm Bluetooth communicaon standard.
Broadcast Time Interval
It refers to the frequency of the sent broadcast frames of the Bluetooth module.
Rated Power
It refers to the signal strength received within 1 m range of the device.
Transmied Power
The higher the transmied power is, the further the receiving distance is.
4. Se
t Parking Lot ID, Parking Lot Floor Amount, etc. according to the actual parking lot
environment.
Note
Enter the hex characters (0 to F) according to the corresponding standard of Bluetooth for the
parking lot ID
.
Parking Camera User Manual
33