Wireless Conference Speakerphone User Manual
Packing List Quick Start Guide Speakerphone USB Cable 1 Wireless Dongle (at the bottom of the device) Storage Case Box
Speaker Volume -/+ Functions Wireless Dongle Answer/hang up Mute / Press the button to adjust the speaker volume by level. Press and hold the button to adjust the speaker volume continuously. Press to answer/hang up a call. Long preess the button to reject a call. Press to turn on/off pickup function. White light: Speakerphone picking up sounds. Red light: Speakerphone off.
Power Bluetooth USB Type C Hold the button to turn on/off the device. Solid Red: Power≤ 15%. Solid Yellow: While not 15%30% Flashing White: The device is charging. Solid White: The device is fully charged. If the device has not been connected via any means of of Bluetooth, wireless dongle or wireless cable within 10 minutes and no other operations are performed, the device will automatically shut down. Hold the button to switch Bluetooth state.
Connection Bluetooth Connection *The default Bluetooth name is 8-mic Speakerphone for Bluetooth connection.
Wireless Dongle Connection *The default wireless receiver name is Multi-mic Speakerphone for wireless dongle connection.
* USB Cable Connection USB 3.0 * USB Cable *Connect the device to intelligent terminals, such as computers and conference flat panels. *It is recommended to plug into USB3.0 interface of the terminal. *It is recommended to connect the the device to intelligent terminals with Type C interface or Type-C-to-A interface. *It is recommended to use original cable for audio quality. *The default device name is 8-mic Speakerphone for USB cable connection.
Charging USB Cable 7
Setup Guide Audio Speaker Default Settings Default Settings 8-mic Speakerphone Volume Microphone 8-mic Speakerphone Volume Plug the microphone in the computer and run the conference/video software to use the device. *What should I do if the device cannot work in the conference/video software: Check if the microphone and speaker of the software is set as its own name in the audio settings; Check if the computer or the conference panel set the audio input and ouput as its own name.
FAQ Visit http://enpinfodata.hikvision.com/analysisQR/showQR/304d56e7 for frequently asked questions. Safety Instruction Warnings Laws and Regulations The device should be used in compliance with local laws, electrical safety regulations, and fire prevention regulations. Electrical Safety The socket-outlet shall be installed near the equipment and shall be easily accessible. Battery CAUTION: Risk of explosion if the battery is replaced by an incorrect type.
Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
For Speakerphone: This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. ce matériel est conforme aux limites de dose d'exposition aux rayonnements, FCC / CNR-102 énoncée dans un autre environnement.cette eqipment devrait être installé et exploité avec distance minimale de 20 entre le radiateur et votre corps.
UD28874B