Portable Conference Camera User Manual
Packing List User Manual Remote Control Camera Privacy Shutter USB Cable Quick Start Guide 1 User Manual Card
Functions Pan/Tilt Control Indicator Turn On/Off Camera Mute Volume Zoom In/Out Page Down Page Up Hyperlink 2
Pan/tilt the camera. Press the button to adjust the camera by level. Press and hold the button to adjust the camera continuously. Turn on/off video streaming. Press the button to zoom in/out by level. Press and hold the button to adjust the camera continuously. Turn on/off the pickup function of the camera. Adjust the volume of speaker. Press the button to adjust the volume by level. Press and hold the button to adjust the volume continuously. Scroll the file page. Double-click to enter the hyperlink.
Microphone Lens Lens Adjusting Scroll USB Type C Status Indicator Power Indicator 4
Power Indicator Solid Red: Power is lower than 15% Solid Orange: Power is lower than 30% Solid White: Power is more than 30% Status Indicator Solid Red: Mute Solid White: Working Normally No Light: Standby 5
Connection USB Cable Connection & Charging USB3.0 USB Cable Connect the device to an intelligent terminal, such as a computer or conference flat panel. The device starts to charge when connected to a computer.
Setup Guide Select Speaker Default Settings 1080P CONF Camera-Audio Select Microphone Default Settings Select Camera Default Settings 1080P CONF Camera-Audio 1080P CONF Camera Mute Camera Power on the device and open the conference/video software. Select the speaker and microphone as 1080P CONF Camera-Audio, and select the Camera as 1080P CONF Camera. Take the actual product name as standard.
Using Guide Open the battery cover and remove the battery pull tab before using. Press the remote control with both hands and rotate it in the direction of arrow to open the batter y cover.
9
Adjust the view angle.
The privacy shutter and remote control can be magnetically attached to the device.
FAQ Visit http://enpinfodata.hikvision.com/analysisQR/showQR/35d08787 for frequently asked questions. Safety Instruction Warnings Laws and Regulations The device should be used in compliance with local laws, electrical safety regulations, and fire prevention regulations. Electrical Safety The socket-outlet shall be installed near the equipment and shall be easily accessible. Battery Do not ingest battery. Chemical burn hazard! This product contains a coin/button cell battery.
Never place the equipment in an unstable location. The equipment may fall, causing serious personal injury or death. DO NOT touch the sharp edges or corners. Transportation Keep the device in original or similar packaging while transporting it. DO NOT drop the product or subject it to physical shock. Power Supply EUT will be charged by specified source which the output circuit comply with LPS/PS 2. Refer to the device label for the standard power supply.
—Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2.
©2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvision.com/).
UD28360B-B
