User's Manual

Authencaon Sengs
Display Authencaon Result
You can check Face Picture, Name, Employee ID and Temperature, to display the authencaon
result.
Name
De-idencaon
You can check Name De-idencaon, and the whole name will not be displayed.
Picture Uploading and Storage
Upload Captured Picture When Authencang
Upload the pictures captured when authencang to the plaorm automacally.
Save Captured Picture When Authencang
If you enable this funcon, you can save the picture when authencang to the device.
Save Registered Picture
The registered face picture will be saved to the system if you enable the funcon.
Upload Picture Aer Linked Capture
Upload the pictures captured by linked camera to the plaorm automacally.
Save Pictures Aer Linked Capture
If you enable this funcon, you can save the picture captured by linked camera to the device.
Clear All Pictures in Device
Note
All pictures cannot be restored once they are deleted.
Clear Registered Face Pictures
All registered pictures in the device will be deleted.
Clear Captured Pictures
All captured pictures in the device will be deleted.
Set Face
Recognion Parameters
You can set face recognion parameters for accessing.
Click
Conguraon → Access Control → Face Recognion Parameters .
You can set Working Mode as Access Control Mode. The access control mode is the device normal
mode. You should
authencate your credenal for accessing.
DS-K1T343 Series Face Recognion Terminal User Manual
98