User's Manual

Note
If you change the No., you should reboot the device.
Community No.
Set the device installed community No.
Building No.
Set the device installed building No.
Unit No.
Set the device installed unit No.
If set the device type as Outer Door
Staon, you can set the outer door staon No., and click
Advanced Sengs to set the community No.
Outer Door Staon No.
If you select outer door staon as the device type, you should enter a number between 1 and
99.
Note
If you change the No., you should reboot the device.
Community No.
Set the device installed community No.
Congure
SIP Parameters
Set the device's IP address and the SIP server's IP address. Aer seng the parameters, you can
communicate among the access control device, door
staon, indoor staon, main staon, and the
plaorm.
Note
Only the access control device and other devices or systems (such as door staon, indoor staon,
main staon, plaorm) are in the same IP segment, the two-way audio can be performed.
Go to Conguraon → Video Intercom → Linked Network Sengs .
Set the main staon's IP address and SIP server's IP address.
Click Save.
Press
Buon to Call
Steps
1. Click Intercom → Press Buon to Call to enter the sengs page.
2. Set the parameters.
DS-K1T343 Series Face Recognion Terminal User Manual
101